Air Canada Flight 759
On July 7, 2017, an Airbus A320-211 operating as Air Canada Flight 759 was nearly involved in an accident at San Francisco International Airport in San Mateo County, California, United States. The flight, which originated at Toronto Pearson International Airport, had been cleared by air traffic control to land on San Francisco's runway 28R and was on final approach to land on that runway; however, instead of lining up with the runway, the aircraft had lined up with the parallel taxiway Charlie on which four fully loaded and fueled passenger airplanes were stopped awaiting takeoff clearance. The flight crew initiated a go-around prior to landing, after which it landed without further incident. The aircraft on the taxiway departed for their intended destinations without further incident. The subsequent investigation by the National Transportation Safety Board (NTSB) determined that the Air Canada airplane descended to 59 feet (18 m) above the ground before it began its climb, and that it missed colliding with one of the aircraft on the taxiway by 14 feet (4.3 m). The NTSB determined the probable cause was the Air Canada flight crew's confusion of the runway with the parallel taxiway, with contributing causes including the crew's failure to use the instrument landing system (ILS), as well as pilot fatigue. A retired pilot stated the runway confusion that almost happened "probably came close to the greatest aviation disaster in history" as five airplanes and potentially over 1,000 passengers were at imminent risk.
Excerpt from the Wikipedia article Air Canada Flight 759 (License: CC BY-SA 3.0, Authors, Images).Air Canada Flight 759
Geographical coordinates (GPS) Address Nearby Places Show on map
Continue reading on Wikipedia
Geographical coordinates (GPS)
Latitude | Longitude |
---|---|
N 37.616111111111 ° | E -122.35944444444 ° |