place

Ashland station (MBTA)

2002 establishments in MassachusettsMBTA Commuter Rail stations in Middlesex County, MassachusettsRailway stations in the United States opened in 2002
Ashland MBTA station, March 2022
Ashland MBTA station, March 2022

Ashland station is an MBTA Commuter Rail station in Ashland, Massachusetts. It serves the Framingham/Worcester Line. It has a long driveway leading from the south parking lot to the intersection of West Union Street (Route 135) and Voyagers Lane. Like the other stations on the line west of Framingham, Ashland serves as a park-and-ride station with 678 parking spots.

Excerpt from the Wikipedia article Ashland station (MBTA) (License: CC BY-SA 3.0, Authors, Images).

Ashland station (MBTA)
Pleasant Street,

Geographical coordinates (GPS) Address Nearby Places
placeShow on map

Wikipedia: Ashland station (MBTA)Continue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 42.2616 ° E -71.4826 °
placeShow on map

Address

MBTA Parking

Pleasant Street
01721
Massachusetts, United States
mapOpen on Google Maps

Ashland MBTA station, March 2022
Ashland MBTA station, March 2022
Share experience

Nearby Places

Framingham Reservoir No. 3 Dam and Gatehouse
Framingham Reservoir No. 3 Dam and Gatehouse

The Framingham Reservoir No. 3 Dam and Gatehouse is a historic waterworks facility in Framingham, Massachusetts. The dam and gatehouse are located at the southeastern end of Framingham Reservoir No. 3, off Massachusetts Route 9. They were built 1876–78 as part of an expansion of the public water supply of the city of Boston. The dam is 2,280 feet (690 m) long, and impounds an area of 253 acres (102 ha) in the Sudbury River watershed. The reservoir is the largest of the three Framingham reservoirs that were built at that time. The dam's core is constructed of granite rubble laid in cement. There is a granite-lined overfall area 100 feet (30 m) long, which was originally topped by flashboards. At the end of the overfall area nearest Route 9 stands the gatehouse, a granite structure with a rectangular main block and a smaller wing. Both sections have a steeply pitched slate roof. The door is in a round-arch recess, and the building is capped by a cupola. It houses controls for two 4-foot (1.2 m) mains connected to the Sudbury Aqueduct via the gatehouse at Reservoir No. 1. The water is directed either directly beyond the dam into reservoir 1 or through the 4-foot mains to the Sudbury Aqueduct gatehouse.The dam was built by contractors from Worcester, and the gatehouse was built by Benjamin Dewing of Boston to a design by the Boston city architect, George Clough. Since its construction, the reservoir, which is also known as the Foss Reservoir, has been connected by an open channel to the Sudbury Reservoir (in 1898), and had its shore areas resurfaced (in 1907–08). Nearly all of the reservoir's water comes from the Sudbury Reservoir as its own natural watershed is very limited. Of the Framingham Reservoirs, Reservoir #3 is the only one that was regularly used throughout its time as an active water source due to its better water quality than the reservoirs to the south. The reservoir is no longer in active service though it is maintained as an emergency source. It is the only one of the Framingham reservoirs still maintained as an emergency source. The dam and gatehouse were listed on the National Register of Historic Places in 1990.

Framingham Reservoir No. 2 Dam and Gatehouse
Framingham Reservoir No. 2 Dam and Gatehouse

The Framingham Reservoir No. 2 Dam and Gatehouse is a historic water works facility in Framingham, Massachusetts. The dam and gatehouse are located west of the junction of Winter and Fountain Streets, and impound a branch of the Sudbury River. The reservoir, which is also known as the Brackett Reservoir, was built 1877-79 as part of an expansion of the water supply of the city of Boston. The dam is 1,376 feet (419 m) in length, with a centered overfall area. The core of the dam is granite rubble laid in cement, with earthen embankments. The overfall area is faced on the downstream side with cut granite, and earthen embankment on the upstream side. It is topped with granite and originally had iron mounts for flashboards. The gatehouse is a rectangular granite structure with a steep hip roof, a brick chimney and an eyebrow dormer. The door and windows are in round-arch openings. It contains gate controls for regulating water flow from the reservoir and from a 4-foot (1.2 m) pipe connected to Reservoir No. 1, and a 2-foot (0.61 m) pipe connected to the Ashland Reservoir.The dam was built by contractors from upstate New York, and the gatehouse was built by James Fagin of Boston to a design by the Boston city architect, George Clough. The Metropolitan Water Board, established in 1895 to oversee the city's water supply, took the reservoir out of service soon afterward due to its poor water quality.The dam and gatehouse were listed on the National Register of Historic Places in 1990.