place

Maenofferen quarry

FfestiniogFfestiniog RailwayRailway inclines in WalesSlate mines in GwyneddUse British English from January 2018
Mill level
Mill level

Maenofferen quarry (also known as Maen Offeren quarry) is a major slate quarry in the town of Blaenau Ffestiniog, north Wales and one of the major users of the Ffestiniog Railway. It continues to produce crushed slate on a limited scale under the ownership of the nearby Llechwedd quarry.

Excerpt from the Wikipedia article Maenofferen quarry (License: CC BY-SA 3.0, Authors, Images).

Maenofferen quarry
Rhiwbach No. 3 incline,

Geographical coordinates (GPS) Address Nearby Places
placeShow on map

Wikipedia: Maenofferen quarryContinue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 53.0012 ° E -3.9186 °
placeShow on map

Address

Rhiwbach No. 3 incline

Rhiwbach No. 3 incline
LL41 3EX , Ffestiniog
Wales, United Kingdom
mapOpen on Google Maps

Mill level
Mill level
Share experience

Nearby Places

Festiniog and Blaenau Railway
Festiniog and Blaenau Railway

The Festiniog & Blaenau Railway (F&BR) was a narrow gauge railway built in 1868 to connect the town of Blaenau Ffestiniog in Wales with the slate quarries around Tanymanod and the village of Llan Ffestiniog, 3+1⁄2 miles (5.6 km) to the south. At Blaenau Ffestiniog it made a direct connection with the Festiniog Railway (FR) with which it was closely associated during its fifteen-year life. The railway was purchased by the Bala and Festiniog Railway in 1883 and converted to 4 ft 8+1⁄2 in (1,435 mm) standard gauge to extend the Bala Ffestiniog line, a branch of the GWR's line from Ruabon to Barmouth. The promoters owned the land on which the line was built, so no parliamentary process was needed to incorporate the company or proceed with building, though the operators sought and obtained Board of Trade inspection before opening as if that were a statutory requirement.Officially the line's gauge was 1 ft 11+3⁄4 in (603 mm), however, a Board of Trade inspection in 1868 recorded it as 1 ft 11+1⁄4 in (591 mm), as did the locomotives' manufacturer's catalogue, repeated in the magazine "Engineer". A survey of the line conducted by Vignes in 1878 gave the gauge as 1 ft 11+1⁄2 in (597 mm). In practice the tolerances were sufficiently wide to allow Festiniog Railway locomotives and rolling stock to use the line, but there is no record of F&BR stock venturing onto FR metals other than transit to Minffordd when their two locomotives made rare visits to Wolverhampton for heavy repair. They are unlikely to have made these trips along the FR in steam and may even have travelled on flat wagons.