place

Milford Tunnel

Grade II listed buildings in DerbyshireGrade II listed tunnelsHistory of DerbyshireRail transport in DerbyshireRailway tunnels in England
Tunnels completed in 1839Tunnels in DerbyshireUse British English from March 2018
Milford Tunnel
Milford Tunnel

Milford Tunnel is a double-track railway tunnel on the Midland Main Line in Derbyshire which runs under a hill called the Chevin between Duffield and Belper. It was built in 1840 by the Stephensons for the North Midland Railway. At 856 yards (783 m) long, Milford Tunnel was the second-longest tunnel on the North Midland Railway when it was built.The west side of the Derwent valley has a number of gritstone outcrops, one being Burley Hill to the south of Duffield, another being Castle Hill in Duffield itself. The valley here however was too narrow, and already occupied by the village of Milford from which the tunnel gets its name, and one of Jedediah Strutt's cotton mills. The name Chevin has Celtic origins, but the hill is often called Firestone Hill, for the spot on which the beacon fires were lighted to rouse the country when peril of invasion or other dangers were imminent.

Excerpt from the Wikipedia article Milford Tunnel (License: CC BY-SA 3.0, Authors, Images).

Milford Tunnel
Hazelwood Road, Amber Valley

Geographical coordinates (GPS) Address Nearby Places
placeShow on map

Wikipedia: Milford TunnelContinue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 53.00121 ° E -1.48737 °
placeShow on map

Address

Chevin Vale Golf Course

Hazelwood Road
DE56 4DQ Amber Valley
England, United Kingdom
mapOpen on Google Maps

Milford Tunnel
Milford Tunnel
Share experience

Nearby Places

Milford, Derbyshire
Milford, Derbyshire

Milford is a village in Derbyshire, England, on the River Derwent, between Duffield and Belper on the A6 trunk road. Until the end of the 18th century it was no more than a few houses near the point, about a quarter of a mile further south, where a Roman road from the Wirksworth lead mines forded the river. The road still exists as it passes across the Chevin hill and descends into the village by what is now Sunny Hill. It is thought to have then proceeded along the east bank of the river to the Roman garrison of Derventio, in what is now Derby where it connected with Rykneld Street.At nearby Makeney, in 1554, Burchard Kranich built the first Smeltmill for extracting lead from its ore. In 1581 Sir John Zouch of Codnor Castle set up a wire drawing works. This followed the opening of a works in Hathersage in 1566 where Christopher Schutz, a German immigrant, had invented a process for drawing wire. Hathersage became a centre for wire drawing and, later, needle making.Of Makeney, it was written in 1817, Makeney, a hamlet of [the parish of Duffield], (Machenie), is described in the Domesday Survey as one of the manors of Henry de Ferrars. It is now considered as parcel of the manor of Duffield. About 700 hands are employed by Messrs. Strutt in the spinning and bleaching of cotton, at Millford, a populous manufacturing village in this parish.There is a Unitarian chapel at Millford, supported by Mr. Strutt; who supports also a Lancasterian school, in which the numbers are about 300: a room to accommodate about 400 is now building at Millford. The girls in this school, and that at Belper, are taught to sew, cut out, &c. as well as to read and write. A chapel has lately been erected here for the Wesleyan Methodists.The Royal Mint had acquired the rights to Schutz' process in 1568 and set out to restrict its use to the Company of Mineral and Battery Works. However, the works continued supplying the Belper nail makers among others and by the time Jedediah Strutt bought it, it consisted of two forges and a slitting and rolling mill, occupying both sides the river. Some of the mill buildings are now the Riverside Garden Centre. In 1778 Jedediah Strutt built cotton spinning mills after the pattern developed by Richard Arkwright having been in partnership with him when he built the mill at Cromford. Part of the Milford mill still exists as well as much of the workers' housing. Milford's claim to fame is that one of Strutt's apprentices at Milford was Samuel Slater, who absconded to America carrying Arkwright's system in his head. He settled in Pawtucket, Rhode Island and replicated Arkwright's success. There is some debate about the origin of the name Milford. It is generally reckoned to be a corruption of mule forde and it is so recorded (briefly) in the Domesday Book when it was owned by Henry de Ferrers. There were a number of fords, which probably changed their position as the river changed its course. An old lane leading down to one of them was called "Save Penny Lane," because people who used it, and crossed the ford, saved the penny toll which Messrs. Strutt charged for crossing the bridge they had built. Afterwards, the Strutts had the ford destroyed and the river deepened. At some time, however, Milford was called New Mills. A map of 1787 names the road from Duffield as New Mills Road, and Samuel Slater's indentures as an apprentice record him as living in "New Mills, in the Parish of Duffield". The Holly Bush Inn is a 17th or early 18th century Grade II listed public house at 2 Holly Bush Lane, Makeney (part of Milford). It is on the Campaign for Real Ale's National Inventory of Historic Pub Interiors.