place

Clement C. Clay Bridge

1928 establishments in AlabamaAlabama building and structure stubsAlabama transportation stubsBridges completed in 1928Bridges completed in 1931
Bridges completed in 1965Bridges completed in 2006Bridges of the United States Numbered Highway SystemBridges over the Tennessee RiverBuildings and structures in Huntsville, AlabamaCantilever bridges in the United StatesConcrete bridges in the United StatesDecatur metropolitan area, AlabamaHuntsville-Decatur, AL Combined Statistical AreaRoad bridges in AlabamaSouthern United States bridge (structure) stubsTransportation buildings and structures in Madison County, AlabamaTransportation buildings and structures in Morgan County, AlabamaU.S. Route 231
ClementClayBridge
ClementClayBridge

The Clement C. Clay Bridge (CC Clay Bridge or Whitesburg Bridge) is a two bridge span over the Tennessee River just south of Huntsville in the northern part of the U.S. state of Alabama. Both bridges are cantilever truss types. The original bridge span was built in 1931, replacing Whites Ferry which crossed the river at nearby Ditto Landing. The second span was constructed in 1965. Upon completion, the newer span carried southbound traffic while the original span carried northbound traffic. The Clay bridge was named after former Alabama Governor and Senator Clement Comer Clay. The 1931 span was replaced by a reinforced concrete structure, which opened in June 2006. Demolition of the original span began on August 16, 2006.The bridge carries US-231 and unsigned SR-53 between the Huntsville Metropolitan Area and the Decatur Metropolitan Area. Before the 1952 extension of US-231, the bridge carried SR-38. North of the bridge, US-231 is known as Memorial Parkway.

Excerpt from the Wikipedia article Clement C. Clay Bridge (License: CC BY-SA 3.0, Authors, Images).

Clement C. Clay Bridge
US 231, Huntsville

Geographical coordinates (GPS) Address External links Nearby Places
placeShow on map

Wikipedia: Clement C. Clay BridgeContinue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 34.576 ° E -86.567 °
placeShow on map

Address

US 231
35803 Huntsville
Alabama, United States
mapOpen on Google Maps

linkWikiData (Q5131294)
linkOpenStreetMap (56196530)

ClementClayBridge
ClementClayBridge
Share experience

Nearby Places

Saturn V dynamic test stand
Saturn V dynamic test stand

Saturn V dynamic test stand, also known as dynamic structural test facility, at the George C. Marshall Space Flight Center in Huntsville, Alabama is the test stand used for testing of the Saturn V rocket and the Space Shuttle prior to the vehicles' first flights. Designated building 4550, it stands 363 feet (111 m) tall and is 98 feet (30 m) square. Its central bay has maximum dimensions of 74 by 74 feet (23 m × 23 m), and it is topped by a derrick capable of moving 200-ton objects in a 70-foot (21 m) radius. An elevator provides access to 15 levels in the structure, and a cable tunnel connects the building to control facilities in the space center's East Test Area.NASA built the test stand in 1964 to conduct mechanical and vibrational tests on the fully assembled Saturn V rocket. Major problems capable of causing failure of the vehicle were discovered and corrected here. The new building was so tall that in 1966 when the Saturn V first stage was entering, an observer noted, "Fog and clouds hovered around the top of the 360 foot (110 m) tall test stand most of the day while the 300,000 pounds (140,000 kg) stage was being lifted from its transporter into place inside the stand, said to be the tallest building in Alabama." The stand was used to test how spacecraft behaved when put under vibrating and bending stresses, and to test the connections between major stages of the craft.It was declared a National Historic Landmark in 1985 for its role in the Saturn V program.In addition to the Saturn V dynamic test vehicle, designated SA-500D, two Space Shuttle test vehicles, Pathfinder and Enterprise, were also tested in this facility.

Redstone Test Stand
Redstone Test Stand

The Redstone Test Stand or Interim Test Stand was used to develop and test fire the Redstone missile, Jupiter-C sounding rocket, Juno I launch vehicle and Mercury-Redstone launch vehicle. It was declared an Alabama Historic Civil Engineering Landmark in 1979 and a National Historic Landmark in 1985. It is located at NASA's George C. Marshall Space Flight Center (MSFC) in Huntsville, Alabama on the Redstone Arsenal, designated Building 4665. The Redstone missile was the first missile to detonate a nuclear weapon. Jupiter-C launched to test components for the Jupiter missile. Juno I put the first American satellite Explorer 1 into orbit. Mercury Redstone carried the first American astronaut Alan Shepard into space. The Redstone earned the name "Old Reliable" because of this facility and the improvements it made possible.The Interim Test Stand was built in 1953 by Dr. Wernher von Braun's team for a mere US$25,000 (equivalent to $273,445 in 2022) out of materials salvaged from the Redstone Arsenal. In 1957 the permanent test facility called the Static Test Tower was finally finished, but the Army decided to continue operations at the Interim Test Stand rather than move. From 1953 to 1961, 362 static rocket tests were conducted there, including 200 that led directly to improvements in the Redstone rocket for the Mercury manned flight program. Adapted over the years, it never experienced the growth in size and cost that typified test stands in general, remaining a testament to the engineering ingenuity of the rocket pioneers.