place

Whitehall, New Jersey

Andover Township, New JerseyNew Jersey geography stubsUnincorporated communities in New JerseyUnincorporated communities in Sussex County, New JerseyUse American English from July 2023
Use mdy dates from July 2023

Whitehall is an unincorporated community located within Andover Township in Sussex County, in the U.S. state of New Jersey.Whitehall is located approximately 1.5 mi (2.4 km) south of Andover. Panther Lake, and the Panther Lake Camping Resort, occupy the east side of the settlement. Located west of Whitehall is the northern tip of Allamuchy Mountain State Park.

Excerpt from the Wikipedia article Whitehall, New Jersey (License: CC BY-SA 3.0, Authors).

Whitehall, New Jersey
Whitehall Hill Road, Byram Township

Geographical coordinates (GPS) Address Nearby Places
placeShow on map

Wikipedia: Whitehall, New JerseyContinue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 40.964444444444 ° E -74.739444444444 °
placeShow on map

Address

Whitehall Hill Road 15
07821 Byram Township
New Jersey, United States
mapOpen on Google Maps

Share experience

Nearby Places

Colby Cut
Colby Cut

Colby Cut (also known as Roseville Cut) is one of a number of cuts on the Lackawanna Cut-Off railroad line in northwest New Jersey. Located between approximately mileposts 51.8 and 52.3 in Byram Township, the cut was constructed between 1908 and 1911 by contractor David W. Flickwir. (During construction, Lackawanna Railroad Chief Engineer, Lincoln Bush, would leave the railroad and join Flickwir's construction company to form the Flickwir & Bush construction company.) The cut, which was created by removing fill material obtained by blasting with dynamite or other methods, is 0.53 miles (0.85 km) long, has an average depth of 45 feet (14 m), and a maximum depth of 110 feet (34 m). The cut was the result of the removal of 462,342 cubic yards of fill material within this section. Colby Cut is named for F.G. Colby, from whom some of the land comprising the cut was acquired, west of what would be Roseville Tunnel. In March 1906, Colby, proposed to Lackawanna President William Truesdale for the railroad to locate a train station for the Cut-Off on his property near what was referred to as Roseville Lake (probably Wright's Pond, which is just east and north of the tunnel). Truesdale had Colby contact the chief engineer, Lincoln Bush, to investigate the idea, but the proposal appears to have gone no further. The cut-off's route was finalized on September 1, 1906. In the months prior, an alternate route was considered (Line "M") that would have proceeded north of where the tunnel would be located, avoiding the need for both the massive cut and the similarly massive Pequest Fill. Line M was rejected because its several-mile, curvaceous sweep to the south near Tranquility, NJ, would be operationally slower.Colby Cut is located on a tangent (straight) section of right-of-way, permitting 70 mph (110 km/h), and is just east of the Pequest Fill and just west of Roseville Tunnel. This section is scheduled to receive a single track as part of the reactivation of the line, which was abandoned in 1982 and the tracks removed in 1984. Colby Cut will be cleared as part of the Roseville Tunnel project by NJ Transit, whose rail service is projected to begin in 2026. The cut will have rockfall mitigation installed as well as improved drainage.

Pequest Fill
Pequest Fill

The Pequest Fill is a large railroad embankment on the Lackawanna Cut-Off in northwestern New Jersey, touted at its 1911 completion as the largest railroad fill in the world.Thought to have been the brainchild of Lackawanna Railroad president William Truesdale, the Pequest Fill was one of several remarkable features of the Lackawanna Cut-Off, a project that aimed to reduce the length, grades, and curvature of the railroad's main line over the hilly terrain between Port Morris, New Jersey, and the Delaware Water Gap. During planning, Truesdale rejected 13 prospective routes that skirted the Pequest Valley in favor of a bold, costly, yet operationally superior route across it. In order to maintain a more or less level grade across the valley, a fill of enormous proportions would be required to connect Andover and Green Township.Planning for the route continued through 1906; the final survey map for the line was completed on September 1, allowing the railroad to proceed with eminent domain and hire contractors. The 28.6-mile (46-km) Cut-Off project was divided among seven contractors. Whether by design or happenstance, the responsibility for building the Pequest Fill was divided roughly in half between David W. Flickwir to the east and Walter H. Gahagan to the west. Construction on the Cut-Off began August 1, 1908. The foundation for the three-mile (4.8 km) Pequest Fill was constructed of 6.625 million cubic yards of fill material, far more than could be provided by classic cut-and-fill techniques. (These require a relatively even balance between the amount of dirt and rock material that is removed from an area of the right-of-way to provide a cut through a hill and the needs of a nearby fill.) So the railroad bought 760 acres of farmland and dug it out to a depth of about 20 feet (6 m). Construction wrapped up in autumn 1911.The Pequest Fill crosses four roadways (US Route 206 and three county roads), two railroad rights-of-way (the Sussex Branch and the Lehigh & Hudson River Railway), and one river (the Pequest River). There are no overhead bridges or grade crossings. The east end of Greendell Siding continued onto the Pequest Fill for a short distance; otherwise, the railroad was two tracks wide on the fill. The Cut-Off saw rail service between 1911 (when the Lackawanna Cut-Off opened) to 1979 (when Conrail discontinued rail service). In between, the Lackawanna Railroad operated trains over the Pequest Fill for 49 years; the Erie Lackawanna Railroad for 16 years; and Conrail for three years. After discontinuing service, Conrail sought abandonment of the line and eventually removed the tracks in 1984. In 1985, the Cut-Off was sold to a land developer who proposed to use the entire Pequest Fill for the now-defunct Westway Project in New York City. That never occurred; by 2001, the entire Cut-Off had been acquired by the State of New Jersey. In 2011, NJ Transit received approval to re-lay track between Port Morris Junction and Andover; as of 2023, the line is slated to open for rail service in 2026 or 2027. This Lackawanna Cut-Off Restoration Project also envisions replacing track westward across the Pequest Fill, but no funding has been secured and no completion date projected.