place

Melton Hill Dam

Buildings and structures in Loudon County, TennesseeBuildings and structures in Roane County, TennesseeDams completed in 1963Dams in TennesseeDams on the National Register of Historic Places in Tennessee
Energy infrastructure completed in 1963Historic districts in TennesseeHydroelectric power plants in TennesseeNational Register of Historic Places in Loudon County, TennesseeOak Ridge, TennesseeTennessee Valley Authority dams
USACE Melton Hill Lock and Dam
USACE Melton Hill Lock and Dam

Melton Hill Dam is a hydroelectric dam on the Clinch River just south of Oak Ridge, Tennessee, United States. The dam is operated by the Tennessee Valley Authority, which built the dam in the early 1960s to extend the Tennessee Valley's continuous navigation channel up the Clinch as far as Clinton and to increase TVA's overall power-generating capacity. The dam impounds the 5,470-acre (2,210 ha) Melton Hill Lake, and is the only TVA tributary dam serviced by a navigation lock. The dam and associated infrastructure were listed on the National Register of Historic Places in 2017. Melton Hill Dam was named for a knob atop nearby Copper Ridge where the United States Coast and Geodetic Survey installed a triangulation station in 1884.

Excerpt from the Wikipedia article Melton Hill Dam (License: CC BY-SA 3.0, Authors, Images).

Melton Hill Dam
Lock Access Road, Oak Ridge

Geographical coordinates (GPS) Address Nearby Places
placeShow on map

Wikipedia: Melton Hill DamContinue reading on Wikipedia

Geographical coordinates (GPS)

Latitude Longitude
N 35.885277777778 ° E -84.3 °
placeShow on map

Address

Lock Access Road

Lock Access Road
Oak Ridge
Tennessee, United States
mapOpen on Google Maps

USACE Melton Hill Lock and Dam
USACE Melton Hill Lock and Dam
Share experience

Nearby Places

High Flux Isotope Reactor
High Flux Isotope Reactor

The High Flux Isotope Reactor (HFIR) is a nuclear research reactor at Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee, United States. Operating at 85 MW, HFIR is one of the highest flux reactor-based sources of neutrons for condensed matter physics research in the United States, and it has one of the highest steady-state neutron fluxes of any research reactor in the world. The thermal and cold neutrons produced by HFIR are used to study physics, chemistry, materials science, engineering, and biology. The intense neutron flux, constant power density, and constant-length fuel cycles are used by more than 500 researchers each year for neutron scattering research into the fundamental properties of condensed matter. HFIR has about 600 users each year for both scattering and in-core research. The neutron scattering research facilities at HFIR contain a world-class collection of instruments used for fundamental and applied research on the structure and dynamics of matter. The reactor is also used for medical, industrial, and research isotope production; research on severe neutron damage to materials; and neutron activation to examine trace elements in the environment. Additionally, the building houses a gamma irradiation facility that uses spent fuel assemblies and is capable of accommodating high gamma dose experiments. With projected regular operations, the next major shutdown for a beryllium reflector replacement will not be necessary until about 2023. This outage provides an opportunity to install a cold source in radial beam tube HB-2, which would give an unparalleled flux of cold neutrons feeding instruments in a new guide hall. With or without this additional capability, HFIR is projected to continue operating through 2040 and beyond. In November 2007 ORNL officials announced that time-of-flight tests on a newly installed cold source (which uses liquid helium and hydrogen to slow the movement of neutrons) showed better performance than design predictions, equaling or surpassing the previous world record set by the research reactor at the Institut Laue–Langevin in Grenoble, France.

Molten-Salt Reactor Experiment
Molten-Salt Reactor Experiment

The Molten-Salt Reactor Experiment (MSRE) was an experimental molten salt reactor research reactor at the Oak Ridge National Laboratory (ORNL). This technology was researched through the 1960s, the reactor was constructed by 1964, it went critical in 1965, and was operated until 1969. The costs of a cleanup project were estimated at about $130 million. The MSRE was a 7.4 MWth test reactor simulating the neutronic "kernel" of a type of inherently safer epithermal thorium breeder reactor called the liquid fluoride thorium reactor. It primarily used two fuels: first uranium-235 and later uranium-233. The latter 233UF4 was the result of breeding from thorium in other reactors. Since this was an engineering test, the large, expensive breeding blanket of thorium salt was omitted in favor of neutron measurements. In the MSRE, the heat from the reactor core was shed via a cooling system using air blown over radiators. It is thought similar reactors could power high-efficiency heat engines such as closed-cycle gas turbines. The MSRE's piping, core vat and structural components were made from Hastelloy-N and its moderator was a pyrolytic graphite core. The fuel for the MSRE was LiF-BeF2-ZrF4-UF4 (65-29.1-5-0.9 mole %), the graphite core moderated it, and its secondary coolant was FLiBe (2LiF-BeF2), it operated as hot as 650 °C and operated for the equivalent of about 1.5 years of full power operation. The result promised to be a simple, reliable reactor. The purpose of the Molten-Salt Reactor Experiment was to demonstrate that some key features of the proposed molten-salt power reactors could be embodied in a practical reactor that could be operated safely and reliably and be maintained without excessive difficulty. For simplicity, it was to be a fairly small, one-fluid (i.e. non-breeding) reactor operating at 10 MWth or less, with heat rejection to the air via a secondary (fuel-free) salt.

X-10 Graphite Reactor
X-10 Graphite Reactor

The X-10 Graphite Reactor is a decommissioned nuclear reactor at Oak Ridge National Laboratory in Oak Ridge, Tennessee. Formerly known as the Clinton Pile and X-10 Pile, it was the world's second artificial nuclear reactor (after Enrico Fermi's Chicago Pile-1), and the first designed and built for continuous operation. It was built during World War II as part of the Manhattan Project. While Chicago Pile-1 demonstrated the feasibility of nuclear reactors, the Manhattan Project's goal of producing enough plutonium for atomic bombs required reactors a thousand times as powerful, along with facilities to chemically separate the plutonium bred in the reactors from uranium and fission products. An intermediate step was considered prudent. The next step for the plutonium project, codenamed X-10, was the construction of a semiworks where techniques and procedures could be developed and training conducted. The centerpiece of this was the X-10 Graphite Reactor. It was air-cooled, used nuclear graphite as a neutron moderator, and pure natural uranium in metal form for fuel. DuPont commenced construction of the plutonium semiworks at the Clinton Engineer Works in Oak Ridge on February 2, 1943. The reactor went critical on November 4, 1943, and produced its first plutonium in early 1944. It supplied the Los Alamos Laboratory with its first significant amounts of plutonium, and its first reactor-bred product. Studies of these samples heavily influenced bomb design. The reactor and chemical separation plant provided invaluable experience for engineers, technicians, reactor operators, and safety officials who then moved on to the Hanford site. X-10 operated as a plutonium production plant until January 1945, when it was turned over to research activities, and the production of radioactive isotopes for scientific, medical, industrial and agricultural uses. It was shut down in 1963 and was designated a National Historic Landmark in 1965.

Dixie Lee Junction, Tennessee
Dixie Lee Junction, Tennessee

Dixie Lee Junction is an unincorporated community in Loudon County, Tennessee, United States, situated at the intersection of U.S. Route 70 (US 70) and U.S. Route 11 (US 11). The community is named for its historical location at the junction of the eastern leg of the Dixie Highway (which followed US 70 through the region) and the Lee Highway (which followed US 11). From the advent of automobile travel in the late 1920s until the construction of the Interstate Highway System in the late 1950s and 1960s, these two highways were major cross-country routes, and Dixie Lee Junction developed as a "last chance" stopover for tourists traveling southward from Knoxville. While the completion of the interstates drew away most of the cross-country traffic, the US 70/US 11 intersection still serves a strategic role as the western end of the four-lane Kingston Pike, a major commercial thoroughfare in western Knox County.The Dixie Lee Junction community lies adjacent to the town of Farragut, with the Knox-Loudon county line (which runs perpendicular to Kingston Pike) being the technical boundary between the two communities. US 70 approaches Dixie Lee Junction from Kingston to the west, and US 11 approaches from Lenoir City to the southwest. The merged highways then continue eastward for 20 miles (32 km) through Farragut and Knoxville. Two major interstate highways, Interstate 40 (I-40) and I-75, merge just northwest of Dixie Lee Junction. The Dixie Highway was conceived in 1914 to provide a convenient route from the Midwestern United States to Florida. Its eastern section entered downtown Knoxville via Broadway before veering westward along Cumberland Avenue and out into West Knoxville along Kingston Pike. The Lee Highway, which connected New York and San Francisco, entered Knoxville from Bean Station to the northeast, and merged with the Dixie Highway in downtown Knoxville.Knoxville lay along the Dixie Highway roughly halfway between the Midwestern states and Florida, and thus made a convenient place for Florida-bound tourists to stop for the night. Throughout the 1930s, 1940s, and 1950s, Kingston Pike was lined with motor courts and motels, and restaurants with oddly-shaped buildings and flashy signs designed to catch the attention of passers-by. Businesses in Dixie Lee Junction during this period consisted of "last-chance" ventures that provided food, fuel, and other supplies before south-bound drivers entered a predominantly-rural stretch of the highway en route to Chattanooga.